Guide · Businesses · 4 min read · Updated 17 November 2026
Emergency Glazing and Boarding Up: What Happens After Breakage
Short answer
After a commercial window is broken, the first priority is making the area safe and secure. An emergency glazier attends, removes loose glass and boards the opening, typically for £150–£350 per standard opening. They measure for permanent replacement, which is made to order and fitted later, usually costing £180–£600 for a standard toughened pane. Photograph the damage and contact your insurer as soon as practical.
First steps after a break-in or breakage
Safety comes first. Keep staff and the public away from broken glass and any glass still hanging in the frame, which can fall without warning. If the breakage was caused by a break-in, vandalism or other crime, contact the police and get a crime reference number, and avoid disturbing the scene more than necessary for safety.
Then photograph the damage from inside and outside, including close-ups of the frame and any other damage. Contact your insurer or check your policy, because some policies have an approved glazing provider or a specific process. Finally, call an emergency glazier to make the premises safe and secure as quickly as possible.
- Keep people away from broken and hanging glass
- Call the police if a crime has occurred and note the reference
- Photograph the damage inside and out
- Check your insurance policy for glazing cover and procedures
- Arrange emergency boarding or temporary glazing
- Secure stock, cash and sensitive information
What the emergency glazier does
On arrival, the glazier assesses the opening and makes it safe. They remove loose and hanging glass, clear broken glass from the immediate area and check the frame for damage. Then they board the opening, usually with plywood or similar sheet material fixed securely to the frame or surrounding structure so it cannot easily be removed from outside.
Where boarding would be a problem, such as a shop that needs to keep trading or a window that provides essential light, temporary glazing may be possible using polycarbonate sheet or stock glass. The glazier will then measure the opening accurately and note the glass specification needed for the permanent replacement, including any safety, security or thermal requirements.
| Stage | What happens | Typical cost |
|---|---|---|
| Emergency call-out and boarding | Make safe, clear glass, board opening | £150–£350 |
| Temporary glazing | Polycarbonate or stock glass where suitable | Quoted on site |
| Survey and measurement | Record size and specification | Often included |
| Permanent replacement pane | Made-to-order glass fitted | £180–£600 standard pane |
| Frame or door repairs | Locks, beads, hinges, closers | Quoted separately |
Permanent replacement
Most commercial glass is made to order, especially toughened glass, which cannot be cut once it has been toughened. Larger or specialist units, such as laminated security glass, sealed double-glazed units or fire-rated glass, can take longer. The glazier returns once the glass is ready, removes the boarding, fits the new pane and makes good.
Replacement glass must meet current safety requirements for its location, even if the original pane did not. That means toughened or laminated glass in critical locations such as doors and low-level panes under Approved Document K. If the breakage was criminal, it may be a good time to consider upgrading to laminated security glass to make a repeat attack harder.
Upgrading after a break-in
Repeat attacks are common on premises that have been targeted once. Laminated glass holds together when broken, making it much harder to create an opening even after the glass is cracked. Security glazing classified to BS EN 356 is tested against manual attack, with higher classes resisting more determined attempts. Bullet-resistant glazing is tested separately for specialist situations.
Other measures can work alongside better glass. Security film, internal grilles, roller shutters and improved locks on entrance doors all help. Any external shutters or grilles may need planning permission, particularly in conservation areas, so check with the council before fitting. A specialist can advise on the right level of protection for your premises and risk.
Insurance and record keeping
Many commercial insurance policies cover glass breakage, sometimes as a separate section. Check what is covered, whether emergency boarding is included, and whether you need to use an approved contractor or obtain quotes first. Keep copies of the glazier's invoices, photos, the crime reference and any communication with your insurer.
It also helps to keep a simple glazing schedule for your premises, listing the size, type and thickness of each pane, especially large shopfront and entrance glass. This speeds up ordering, avoids repeat surveys and makes it easier to confirm the right specification is fitted. Facilities managers with several sites often find this saves time and reduces downtime after breakages.
Reducing the risk of future breakages
Not every breakage is criminal. Thermal stress, where part of a pane heats up much more than the rest, can crack glass, particularly large panes partly in shade or with dark film or posters stuck to the inside. Impact from trolleys, chairs and vehicles is another common cause around loading areas and car parks. Doors slamming in the wind, or failing closers that let doors swing violently, can also crack glazed doors over time.
Simple measures help. Fit bollards or kick rails where vehicles and trolleys run close to glazing, keep door closers serviced, and avoid sticking dark materials directly onto glass that gets strong sun. For entrance doors, check that floor springs and patch fittings are adjusted and not worn. Where vandalism is the concern, better lighting, CCTV and laminated glass together make premises a less attractive target. A periodic inspection of glazing, frames and door hardware can catch problems before they lead to a broken pane and an emergency call-out.
Questions people also ask
How quickly can a broken shop window be boarded up?
Emergency glaziers aim to attend as quickly as possible, often within a few hours, depending on location, time of day and demand. Boarding a standard opening usually takes under an hour once on site. Permanent replacement glass is made to order and fitted on a return visit.
Can a broken pane be replaced the same day?
Sometimes, for small panes of standard annealed or laminated glass that can be cut from stock. Toughened glass is made to order and cannot be cut after toughening, so it usually needs a return visit. The opening is boarded or temporarily glazed in the meantime.
Does replacement glass have to be safety glass?
In critical locations, yes. Glass in and beside doors and low-level panes must meet safety glazing requirements under Approved Document K, even if the broken pane was ordinary glass. Workplace regulations also require transparent surfaces to be safe where necessary.
Written and checked by the Commercial Glazing team. Read our editorial policy.
More guides
How Much Does Commercial Glazing Cost in the UK? 2026 Prices
In the UK in 2026, replacing a standard toughened commercial pane typically costs £180–£600, and an emergency boarding call-out £150–£350. Frameless…
Office Glass Partitions: Types, Costs and Specification Guide
Office glass partitions divide space while keeping light and openness. Single-glazed frameless partitions cost about £300–£550 per linear metre,…
Commercial Safety Glazing and Manifestation Rules Explained
In commercial buildings, glass in critical locations, such as in and beside doors and low-level panes, must be safety glass that breaks safely or…
Security Glass for Shops and Offices: Options Compared
Toughened glass is strong and breaks safely but gives little resistance once broken. Laminated glass holds together when cracked and is the usual…
Get a free commercial glazing quote
Tell us what you need and we'll come back with a clear price.
Request a quote